Should i put risers on my skateboard

Even the softer longboard wheels transmit some of the vibrations from rougher pavement. Shock pads absorb much of those vibrations before they can reach the board and get transferred to your feet.

There is simply a lack of the annoying and uncomfortable shocks from the wheels hitting things. Prevent stress cracks. Those cracks result from the aging wood in the deck shrinking while under stress from skating and from the tightness of the truck bolts.

Stress cracks are one reason why old decks can feel spongy, but they can also ruin even relatively new boards. One way to prevent them is by using shock pads, because they absorb the energy from the common stresses in skating. The equipment you use should add to your experience and should enable you to do what you want when you skate. If riser pads or shock pads accomplish that for you, then by all means use them.

However, make sure you understand the differences between the two, so that you can get the most out of your setup. If you only want a slight rise, then you can choose the type that suits you best. Risers are an inexpensive way to play around with your equipment and find out what works best for your unique style of skating. Yocaher Admin. Recent Posts See All. We have focused on the highest quality rather than appearance since you will not see the designs of the risers once they have been fixed between your trucks and your skateboard.

Although they look similar and positioned in identical places on your skateboard there are vital difference between the two. Skateboard riser pads are made of hard plastic and their primary aim is to reduce wheel bite. Shock Pads are made of rubber and designed to reduce shock and vibration for a smoother ride.

Unlike riser pads — using shock pads can also reduce your speed. Rectangular riser pads are the most common shape for skateboarders. Rectangular pads are standard, they will increase your deck height and decrease the shock felt by the rider. Remember though, the higher your deck is from the ground — the less maneuverable it will be. Wheel bite means your wheel rubs the deck during turning or skating. Therefore, a rider loses balance and falls from the skateboard.

However, riser pads increase the overall height of the board. As a result, there is no chance of wheel bite, and you can enjoy your skating safely. Continue Reading.

Our skateboard risers guide will help you to know everything. Skaters use riser pads not only for wheel bite. Riser pads also provide a lot of advantages.

However, there are some disadvantages as well. Skaters face a common and significant problem named wheel bite. As you already know, it occurs when the wheel rubs the deck. As a result, you may fall from the skateboard and get seriously injured. However, riser pads can prevent wheel bites. That must say, it is the main advantage of riser pads. Skateboarding is the game of balancing. In other words, you have to be good at balancing to be a good skater. However, riser pads help to keep an outstanding balance of the skateboard.

You can also keep balance while doing stunts on your skateboard. Not only does it look cool, but it also decreases the total weight of your skateboard. Additionally, some skateboarders like to mix and match rectangular and angled riser pads. For instance, an angled riser with thick part facing the center and a flat riser on the back can increase your front turn steering capabilities while stabilizing the back, and vice-versa.

Be aware that no matter what riser pad shape you choose, you will need to buy longer hardware to accommodate the extra height! Consult our helpful hardware size calculator above. When you install riser pads, you of course want to install four screws, one on each corner. However, you might notice that there are a total of six holes in skateboard riser pads.

Why is this? Manufacturers conveniently put an extra set of holes in most riser pads to accommodate both new school and old school skateboards. As we mentioned in our trucks section, the mounting holes in old school boards are slightly further apart because old school trucks pres were larger. So to avoid having to sell "old school riser pads" and "new school riser pads" as separate products, manufacturers simply drilled an extra set of holes to give skateboarders the option of which type of trucks they want to use.

Check out the available skateboard riser pads currently in stock. We are Warehouse Skateboards. Our goal is to provide you with great customer service and information to make an informed skate purchase.