Can you resole keens

I sent my shoes in for an Executive NuCraft late August and received them about 3 weeks later. The Traveler is designed to renew any rubber-soled shoes or sandals, including Timberland, Rockport, Birkenstock, and other popular comfort brands. When choosing the sole, characteristics such as sole and heel thickness and styling, density, weight, and durability are all considered.

A gentleman here in Georgia said that it could not be done. He should have said that he could not do it. I sent in a pair of Wolverine Big Horn boots to be resoled as they are no longer available in black. NuShoe did a wonderful job repairing and refurbishing them.

Just like new. Thanks again, NuShoe! We understand that over time the tag can wear away, making it difficult to read the numbers. Therefore, if the tag is completely worn off, please put "not legible" or "worn-off" in that field. Do not fear, we have options for you! Our warranty team will accept the following in place of a receipt:. While we don't currently have replacement laces for all of our shoes, we do offer a few replacement laces on our website at: www.

If you need help choosing a lace, feel free to reach out at info keenfootwear. There are several companies that sell laces in different lengths and widths online. Yes, replacement insoles are a great way to fine-tune comfort for your feet and arch support needs. Simply trim them to fit. Follow the link below to see our selection, including our new plant-based insoles.

We do not offer repair services at this time, nor do we have replacement hardware to send out. However, If the shoes are under a year old we would consider replacing them through our warranty program. Find out more about our warranty policy here: www. Believe it or not, your shoes require a little love in order to work properly!

If the adhesive used in the outsole is not flexed or used regularly, the bond can dry and crack, especially in certain climates. This can cause the sole to de-laminate. For issues like these, we typically recommend a glue called 'barge cement' — a marine adhesive that is flexible and waterproof, so it works quite well for this sort of repair.

Can any Keen Utility work boots be re-soled? The Cincinnati is the only product that is able to be re-soled, as it features a true Goodyear welt construction. Usually when this happens, it's because the insole is rubbing on the bottom of the shoe. To fix this, you can try removing the insole and rough up the edges and bottom with medium grit sandpaper. You can also try a little talcum powder or corn starch sprinkled inside, which acts as a dry lubricant to reduce friction. The downside of Keens are small.

The open frame lets gravel and grit enter easily which means stopping and getting rid of that painful rock often. Also, they can cause the, "heartbreak of Tiger-Feet. I imagine that Roman legionaries had the same problem.

For whatever reason, poor design or simple wear and tear, my Keens have started to come apart where the ankle strap meets the footbed. The stitching is failing at six of the eight attachment points. Lacking an industrial strength sewing machine or the patience to hand sew problem area, I decided to repair the area with adhesive reinforced with steel staples.

Wash the shoes so no grit or dirt is present. Keens do fine in the washing machine, but let them air dry. For this particular method, you can leave the shoes damp as Gorilla glue needs the moisture to cure. If not already damp from washing, use a moist rag to dampen the area of the repair.

Just damp, not soaking wet! Squeeze a small amount of Gorilla glue between the fabric of the shoe. The glue will foam up to 3x the amount you apply, so use sparingly. You will have plenty of time to adjust if necessary. The glue takes 30 to 60 minutes to foam up fully. Use a stapler to secure the fabric in place. Simply staple where the stitching was before it failed.

Use the stapler in such a way that the flat part of the staple is facing your foot and the grasping side of the staple is facing the outside of the shoe. Once you are satisfied with your stapling job, use a pair of pliers to crush the staples as flat as possible.

The normal stapler mode leaves the staples with a slight thickness. You want the staple as flat as possible. Optional in this case as the staples are doing the major clamping in this process. However, I used some bulldog clamps to flatten the area where I did not have staples. The Gorilla glue will take about 30 minutes to foam up and really grab hold of the fabric.

Don't be tempted to try it out though. The glue reaches its full strength over 24 hours, so leave it at least overnight before you handle the shoe. If you used too much glue and it has foamed up out of the repair area, you can clean it up with a cotton swab.